200A Loop Resistance Tester
Darui Electric recommends:
The intelligent loop resistance tester, also known as the RX transformer loop resistance tester, is used to measure the contact resistance of main contacts in various high and low voltage circuit breakers (commonly referred to as switches). It can also test the resistance of high and low voltage cable lines, busbars, welds, and any ultra-low resistance non-inductive electrical appliances.
Parameters
4. Resolution: 1μΩ
5. Test accuracy: 0.5%
6. Allowable test duration: 300min
7. Power supply voltage: 220V ± 10% 50HZ
8. Dimensions: 300×280×170 (mm)
2. The instrument should be placed in a dry, well-ventilated indoor area free from corrosive gases.
When the equipment needs to be transported, it is recommended to use the company's instrument packaging wooden box and shock-absorbing materials to avoid unnecessary damage during transit, which could cause unnecessary losses.
When the equipment is transported without a wooden box, stacking is not allowed. When using the company's instrument packaging box, the maximum stacking layers allowed is two.
During transportation, the instrument panel should face upward.
2. Storage
The equipment should be placed in a dry, dust-free, well-ventilated indoor area free from corrosive gases. Without wooden box packaging, stacking is not allowed.
When storing, the panel should face upward. Place moisture-proof materials under the equipment to prevent dampness.
Product user manual: 1 copy, Test leads: 1 set
Printing paper: 2 rolls, Printer manual: 1 copy
Fuse 10A: 4 pieces, Power cord: 1 piece
Product certificate and warranty card: 1 copy
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
