Transformer Ratio Measuring Instrument Quotation
Dary Electric recommends for you:
The transformer ratio tester is a new generation intelligent ratio testing instrument with a microcontroller as the core for measurement calculation and automatic control. It features a full Chinese menu operation interface, with advantages such as intuitive display, good stability, high accuracy, wide measurement range, and no need for a three-phase power supply on site.
Product Features
1. Can accurately measure the capacity of various distribution transformers, passive measurement, convenient and accurate.
2. Built-in power supply, automatically generates three-phase high-power test power.
3. Can measure no-load current, no-load loss, short-circuit voltage, and short-circuit loss of various types of transformers.
4. Automatically performs waveform distortion correction, temperature correction, voltage correction, and current correction (short-circuit test under non-rated current conditions). The operator only needs to input the correction index according to the transformer type, and the instrument automatically calculates the corrected results. It is very suitable for units that do not have conditions for short-circuit tests on larger capacity transformers.
5. Wide voltage range: maximum measurable voltage up to 750V, ensuring accuracy without switching gears. Incorrect voltage gear selection will not damage the instrument.
6. Battery remaining capacity percentage indication function, not just a simple low battery alarm.
6. Large screen, high-brightness LCD display, full Chinese menu and operation prompts for friendly human-machine dialogue, touch buttons for easier operation, wide-temperature LCD with brightness adjustment, adaptable to winter and summer seasons.
7. Users can print test data at any time through the micro printer.
8. Test result storage function, can store 200 sets of capacity test data.
2. Group: 1～12 points
3. Accuracy: 1～1000 0.2 level;
1000～10000 0.5 level
4. Power: AC220V ±10%, 50Hz
5. Operating ambient temperature: -5℃～40℃
6. Operating ambient humidity: <85%
7. Volume: 430×320×215 mm3
8. Weight: 5kg
2. If the test leads are short-circuited or the high and low voltage connections are reversed, the fuse will blow. After the fuse blows, if measurement is attempted, it will stop after displaying "Measuring, please wait!". Turn off the power, replace the fuse with the same rating, and retest.
3. Ensure good contact of connections. The instrument should be properly grounded!
4. The working place of the instrument should be far away from strong electric fields, strong magnetic fields, and high-frequency equipment. The power supply interference should be as small as possible; lighting lines are preferred. If power interference is still significant, an AC purified power source can be used to charge the instrument. The capacity of the AC purified power source should be greater than 200VA.
5. During operation, if the LCD display is disordered, all keys are unresponsive, or the measured value differs greatly from the actual value, press the reset button or turn off the power and restart the operation.
6. When the instrument is not in use for a long time, it should be stored in a dry, ventilated place. The battery should be charged regularly to avoid over-discharge.
